Removable Prosthodontics

3D Printed Partial Dentures
in Chandigarh — Lighter, Better-Fitting, Made In-Clinic

Valplast flexible and metal framework partial dentures designed with 3Shape 3D scanning — no impression trays, no discomfort, and a fit that traditional methods cannot consistently achieve.

Starting From

₹30,000+

Visits

Multiple

Pain Level

Minimal

Cost depends on the type of denture (Valplast or metal framework) and the number of teeth being replaced. All costs are agreed before treatment begins — no hidden charges.

Book Your Consultation

— Understanding the Procedure

What is a partial denture?

A partial denture is a removable prosthesis that replaces multiple missing teeth in a jaw where some natural teeth remain. It attaches to those remaining teeth using precision clasps or flexible gum-coloured retainers, restoring your ability to chew, preventing the remaining teeth from drifting into the gaps, and maintaining the facial muscle support that collapses when multiple teeth are lost.

Unlike a fixed bridge or implants, a partial denture is removable — taken out at night for cleaning. For many patients, it is the most practical and cost-effective route to restoring function across a large area of missing teeth, particularly when the remaining teeth are not strong enough to support a fixed bridge, or when the extent of tooth loss makes implants an extensive undertaking.

At Tricity Smiles, Dr. Sandhu assesses every case individually — reviewing the remaining teeth, bone, bite, and the patient’s long-term goals — before recommending a denture type, material, and design.

Flexible upper partial denture with a pink base and natural-looking teeth
Denture Materials

Valplast flexible or metal framework?

We offer two types of partial denture — each with distinct advantages depending on the clinical situation. Neither is universally better. The right choice depends on your specific case.

Flexible Nylon

Valplast Flexible Denture

Valplast is a thermoplastic nylon material that flexes with the soft tissue, creating a denture that is lighter, more comfortable, and visually discreet — with gum-coloured clasps instead of metal wire.

  • Clasps Gum-coloured nylon — nearly invisible
  • Rigidity Flexible — adapts to soft tissue movement
  • Weight Very light
  • Aesthetics Excellent — no visible metal
  • Metal allergy Fully metal-free
  • Relines Cannot be relined as tissue changes
  • Longevity 5–8 years with good care
Best For
 
Patients replacing front teeth where aesthetics are the priority, patients with metal allergies, smaller spans of missing teeth, and patients who find traditional metal clasps uncomfortable or visible.

Cast Framework

Metal Framework Denture

A cobalt-chrome metal framework denture has a rigid, precision-cast base that is thinner, stronger, and more stable under occlusal load than a flexible alternative — particularly for larger spans.

  • Clasps Precision cast metal rests and clasps
  • Rigidity Rigid — highly stable under biting forces
  • Weight Slightly heavier but more stable
  • Aesthetics Good — clasps visible on back teeth only
  • Thickness Thinner base — more comfortable on palate
  • Relines Can be relined as tissue changes
  • Longevity 10–15+ years with good care
Best For
 
Larger spans of missing teeth, back teeth requiring high chewing stability, patients who want a thinner, more stable denture, and cases where long-term relining may be needed as the bone changes.

Why we do not offer acrylic partial dentures

Standard acrylic partial dentures — the pink plastic variety — are the most common and least satisfactory option. They are bulky, prone to fracture, place damaging stress on remaining teeth through poorly designed clasps, and accelerate the bone loss they are meant to compensate for. At Tricity Smiles, we offer Valplast and metal framework only — materials and designs that are clinically appropriate and built to last.

The Process

What to expect across your appointments

Multiple visits, each with a clear purpose — no shortcuts, no skipped stages.

01

Assessment & 3D Scan

A comprehensive review of the remaining teeth, gum tissue, bone, bite, and facial profile. A 3Shape 3D intraoral scan replaces traditional impression trays entirely — capturing the arch, remaining teeth, and soft tissue contours digitally, without material in the mouth. Bite registration is recorded at this appointment.

02

Framework or Wax Try-In

For metal framework dentures, the cast framework is tried in to verify fit, extension, and clasp positioning before the teeth are added. For Valplast dentures, a wax try-in with the replacement teeth in position allows assessment of aesthetics, bite, and lip support before the final denture is processed.

03

Final Delivery & Fit

The finished denture is inserted and assessed thoroughly — stability, retention, occlusion on both sides, contact with adjacent teeth, and soft tissue adaptation. Adjustments are made chairside. You are shown how to insert, remove, and clean the denture correctly before leaving.

04

Follow-Up & Review

A follow-up appointment within 1–2 weeks addresses any pressure sore spots and fine-tunes the occlusion as you adapt to the denture. Ongoing reviews at your regular check-ups monitor the fit as bone and gum tissue continue to change over time.

— Why Tricity Smiles

Why denture quality depends on more than the material

3Shape Digital Impressions — No Trays Required

Traditional denture impressions are among the most uncomfortable parts of the process — and one of the least accurate. Our 3Shape TRIOS scanner captures the full arch digitally in minutes with no material in the mouth. The digital model gives the lab a far more accurate working record, producing a denture that fits closer to the tissue from the outset.

Try-In Is Not Optional

A try-in appointment — verifying the framework fit or the tooth positions in wax before finalising the denture — is a stage many clinics skip to reduce appointment numbers. We do not. It is the most important quality check in the denture process and the one that prevents the most avoidable remakes and adjustments.

Top-Tier Lab Fabrication

The quality of a denture is a product of the design, the digital scan, and the skill of the laboratory. We work with leading dental labs whose frameworks are cast to precision and whose Valplast processing follows the manufacturer’s full protocol. The lab does not take shortcuts because we do not allow them to.

Honest About Alternatives

A partial denture is not always the best long-term solution. When implants or a fixed bridge would serve you better over the long term, Dr. Sandhu will say so. The goal is not to place a denture — it is to help you make the most informed decision about replacing your missing teeth.
Dr. Sandhu — US-trained dentist in Chandigarh with credentials from USC and UCSF

Dr. Sandhu
USC · UCSF · CMC Ludhiana

Book Your Consultation
WhatsApp Us

— Our Philosophy

Why most dentures don’t fit well — and how 3D
scanning changes that.

The most common complaint about partial dentures — that they are uncomfortable, loose, or cause sore spots — is not a function of the material alone. It is a function of fit. And fit is determined almost entirely by the accuracy of the impression taken at the start of the process.

Traditional denture impressions involve trays loaded with alginate or polyether material placed in the mouth while the patient holds still. The material distorts as it is removed from an undercut-rich mouth. It distorts further as it is handled, transported, and poured in the lab. By the time a model exists, the dimensional changes have compounded through multiple stages.

A denture is only as good as the record it was made from. A distorted impression produces a distorted denture — regardless of how well it is processed.

The 3Shape TRIOS intraoral scanner captures the full arch in a continuous digital scan that has no dimensional distortion — no removal from the mouth, no physical handling, no pouring. The model the lab receives is a precise digital replica of your mouth as it actually is, not an approximation filtered through the limitations of a physical impression.

This matters most for partial denture patients, who often have irregular remaining tooth positions, complex soft tissue contours, and undercut-prone ridges that traditional impressions struggle to capture consistently. The digital workflow gives the laboratory the best possible starting point — and that translates into a denture that fits closer to the tissue, is more stable under chewing load, and requires fewer adjustments at delivery.

3Shape logo

3Shape TRIOS Intraoral Scanner

We use the 3Shape TRIOS system for all denture cases — the same scanner used for our crown and bridge work. The digital workflow eliminates impression distortion, transmits the scan directly to the lab, and produces a working model that is dimensionally accurate to the micron. For denture patients, this means a better-fitting prosthesis from the first appointment — not after multiple remakes.
Book Your Consultation

—   FAQ

Partial denture FAQs

Common questions about removable dentures, materials, and what to expect.
What is a partial denture?
A partial denture is a removable prosthesis that replaces multiple missing teeth when some natural teeth remain. It attaches to the remaining teeth with clasps or flexible retainers, restoring chewing function, preventing remaining teeth from drifting, and supporting facial muscle tone. Unlike a fixed bridge, it is taken out at night for cleaning.
Partial dentures at Tricity Smiles start from ₹30,000. Final cost depends on the type — Valplast flexible or cast metal framework — and the number of teeth being replaced. All costs are discussed and agreed before treatment begins.
Valplast is a flexible nylon material with gum-coloured clasps — lightweight, discreet, metal-free, and well-suited for front teeth or patients with metal allergies. Metal framework dentures have a rigid cobalt-chrome base that is thinner, stronger, and more stable under chewing forces, and can be relined as the bone changes over time. The right choice depends on the location and extent of missing teeth and your clinical presentation.
Traditional denture impressions are prone to dimensional distortion at every stage — removal from the mouth, physical handling, and lab pouring. A 3Shape 3D intraoral scan captures the arch digitally with no material in the mouth and no physical distortion. The result is a more accurate working model and a denture that fits the tissue more closely from the first delivery appointment.
Multiple appointments are required: initial assessment and 3D scan, a try-in of the framework or wax teeth, final delivery, and a follow-up adjustment appointment. The exact number depends on the complexity of the case. The try-in stage is not skipped at Tricity Smiles — it is the most important quality check in the process.
For many patients, implants or an implant-supported bridge offer a more stable, bone-preserving long-term solution. A partial denture is appropriate when implants are not feasible due to bone loss, medical conditions, cost, or patient preference. Dr. Sandhu discusses all options honestly at consultation so you can make an informed decision.

For Patients — Share This Link

Caring for your partial denture

Daily care habits that extend the life of your denture and protect your remaining teeth.
Daily Routine
  • Remove the denture at night — gums need rest from the pressure
  • Store in clean water or a denture soaking solution overnight
  • Clean the denture with a soft denture brush after every meal — not toothpaste (too abrasive)
  • Brush your remaining natural teeth and gums twice daily — every tooth
  • Clean under the clasps — food and plaque accumulate there
What to Avoid
  • Toothpaste on the denture — scratches the surface and harbours bacteria
  • Very hot water — can distort the denture base
  • Biting very hard foods with the denture under load
  • Dropping the denture — clean over a folded towel or basin of water
Good to Know
  • Speech may feel different for the first 1–2 weeks — this resolves with adaptation
  • Mild soreness at pressure points is normal — call us for an adjustment
  • Fit may loosen over time as bone changes — metal dentures can be relined; return for review

Denture cracked, broken, or causing pain?

Call us — Mon–Fri 10–7, Sat 10–2
Call Us

Missing teeth replaced with a denture that actually fits.

Book your consultation with Dr. Sandhu. We will assess your remaining teeth, discuss your options honestly, and design a denture that is built for comfort, stability, and longevity.

Book Your Consultation
View all Services

5★

Google Rating

5-star

rated on Google

20+

Years Experience